Diesel Fuel DPA Pump Head Rotor

The maximum amount of oil DPA type Pump Head Rotor per cycle by changing the piston stroke to adjust. The larger piston stroke, the greater the maximum amount of oil. However, depending on the highest point of the end of the oil within the cam can not be changed. Thus, changing the piston stroke oil change only the starting point. Because the front and rear ends of the lugs embedded control board seat roller eccentric curved slot, so the roller seat and roll, Diesel Fuel DPA Pump Head Rotor maximum amount of oil per cycle by changing the piston stroke to adjust. The larger piston stroke, the greater the maximum amount of oil. However, depending on the highest point of the end of the oil within the cam can not be changed. Thus, changing the piston stroke oil change only the starting point. <br />
The front and rear lugs at both ends embedded in the roller holder Dashboard eccentric arcuate groove, thus moving the roller and the roller holder is limited by the outer edges of the arcuate slot. When the counter-clockwise rotation around the panels, the eccentric arc groove close to an arc from the center seat lug contact with the roller, then the starting point late after oil, piston stroke decreases, less fuel supply; on the contrary, clockwise around the control panel, then the roller seat lug and farther away from the center section of the eccentric arc contact, supply starting point ahead of the piston stroke is increased, a corresponding increase in the fuel supply.
Product link: http: //www.cnducoo.com/diesel-fuel-dpa-pump-head.html